CFP-100G-SR10 - CFP, 100Gb/s, 100GBASE-SR10, MMF, 850nm, 150M

The 100GBASE CFP modules offer customers 100 Gigabit Ethernet connectivity options for data center networking, enterprise core aggregation, and service provider transport applications.

 

The 100GBASE-SR10 CFP module supports link lengths of 100 meters and 150 meters respectively on laser-optimized OM3 and OM4 multifiber cables. It primarily enables high-bandwidth 100-Gigabit links over 24-fiber ribbon cables terminated with MPO/MTP connectors. It can also be used in 10x10G mode along with ribbon to duplex fiber breakout cables for connectivity to ten 10GBASE-SR optical interfaces. Maximum channel insertion loss allowed is respectively 1.9dB over 100m of OM3 cable or 1.5dB over 150m of OM4 cable.

 

Features

• Hot-pluggable CFP form factor
• Supports 103.1Gb/s aggregate bit rate
• Power dissipation < 24W
• RoHS-6 compliant (lead-free)
• Commercial case temperature range of 0°C to 70°C
• Single 3.3V power supply
• Supports digital optical monitoring (DOM)

 

Specifications

• Form Factor: CFP
• Data Rate (max): 103.1 Gb/s
• Cable Tyep: MMF
• Transfer Distance: 150m
• Connector: 24-fiber MPO/MTP
• Operating Temperature Range: Commercial 0°C to 70°C
• Digital Diagnostics (DDM): Yes
• Voltage Supply: 3.3
• Transmit and Receive Wavelength (nm): Ten lanes, 840 to 860nm
• Transmit Power (dBm)
  • Max: -1.0 per lane
  • Min: -7.6 per lane
• Receive Power (dBm)
  • Max: 2.4 per lane
  • Min: -9.5 per lane
• Dimensions (D x W x H): 144.8mm x 82mm x 13.6mm.
• Power Consumption: <12W
• Application: 100 Gigabit Ethernet

 

Standards

• GR-20-CORE: Generic Requirements for Optical Fiber and Optical Fiber Cable
• GR-326-CORE: Generic Requirements for Single-Mode Optical Connectors and Jumper Assemblies
• IEEE 802.3ba
• CFP MSA
• RoHS-compliant

 

Safety

• Laser Class 1 21CFR-1040 LN#50 7/2001
• Laser Class 1 IEC60825-1

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: