10/100M Fast Ethernet 1 SFP Slot & 7 RJ45 Port SFP Media Converter

This series converters are designed to meet the massive needs for Fast network deployment and able to extend a copper based Fast network via fiber cable to a maximum distance up to 120KM. This series converters are fully compliant with IEEE802.3 & 802.3u standards. It can be installed into a Standard Converter Chassis. Installation & operation procedures are simple & straightforward. Operation status can be locally monitored through a set of Diagnostic LED located in the front panel.

 

Features

• 10/100Base-T to 100BASE-FX Converter
• Standard : IEEE 802.3 IEEE 802.3u
• Interface: 7 x RJ-45 connector & 1 x SFP Slot
• MDI/MDIX Auto-Crossover supported
• LED: Power , FX-LINK,TX-LINK,FDX/COL,SD,100.
• Plug and Play installation
• Support Link Alarm
• Support Jumbo Frame (64-9216 Byte)
• Support Voltage Monitor

 

Specifications

• Standard Protocol: IEEE802.3 10 Base-T standard,IEEE 802.3u 100Base-TX/FX standard
• Connector:one RJ-45connector,one SFP slot
• Operation mode: full duplex mode or half duplex mode
• Power supply parameter: outside: 5V DC 1A
• Environmental temperature: 0°C-60°C
• Relative humidity: 5%-90%
• TP cable: Cat5 UTP cable
• Fiber :50/125,62.5/125um multi-mode fiber; 9/125,10/125um single-mode fiber

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: