10/100M Dual Fiber 2-port SC/ST/FC & 4-port RJ45 Fast Ethernet Fiber Media Converter

10/100Base dual fiber media converter is the conversion equipment of Ethernet optical-electronic signals between 10/100M UTP interface (TX) and 100M Fiber interface (FX). The traditional 10/100M Fast Ethernet can be extended to the distance of 120km through optical fiber link. The 10/100base dual fiber media converters are with reasonable price and especially designed for network users.

Features

• Data rate: 10/100M
• UTP port supports: MDI / MDI-X auto crossover
• Optical interfaces: SC, ST or FC; single mode/multimode
• Supporting 1552 Byte packet
• Wavelength: 1310nm/1550nm
• Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction
• Stand alone or card type can be chosen
• External or internal power supply for selection by users

Specifications

• Operating standards: IEEE802. 3u, 10/100Base-TX and 100Base-FX
• MAC address table: 1K
• UTP Connector: RJ-45 10/100Mbps; Fiber Connector: SC 100Mbps
• UTP Cable: Cat. 5 UTP (the max distance up to 100m)
• Fiber (Multimode) Cable: 50/125, 62. 5/125μm (the max distance up to 2km or 5km)
• Fiber (Single mode) Cable: 8. 3/125, 8. 7/125, 9/125, 10/125μm (the max distance up to 20-120km)
• Full Duplex: Supporting standard IEEE802. 3x
• Half Duplex: Back pressure
• LED: Power, FX FDX, FX Link/Act, TX 100, TX FDX, TX Link/Act
• Power: AC 90 ~ 240V; DC 5V.1A
• Ambient Temperature: 0 ~ 70℃
• Humidity: 5% ~ 90%

Write a review