A Pair of 10/100M Single Fiber 1-port SC/ST/FC & 2-port RJ45 BIDI WDM Fiber Media Converter

A Pair of 10/100M Single Fiber 1-port SC/ST/FC & 2-port RJ45 BIDI WDM Fiber Media Converter

Product #: FMC-FE-BIDI-1F2T
Availability: In Stock
Leadtime: Usually ships in 2 days
Warranty: Lifetime
Price: $93.00
* Fiber Wavelength, Mode Type & Reach Distance:




Connector:




10/100Base Single Fiber Fast Media Converter can convert Optical-Electric Ethernet signals between 10/100M UTP interface (TX) and 100M optical fiber interface (FX). It could extend traditional 10/100M Fast Ethernet to the distance of 80km through single optical fiber link. Its performance is stable and reliable, in line with the Ethernet design standards, and has anti-lightning protective measures. It must be used in couples. It is the campus broadband network, broadcasting network and intelligent broadband residential broadband fiber-to-floor fiber to the home of the best applications.


Features

  • Data rate: 10/100M
  • UTP port supports: MDI / MDI-X auto crossover
  • Optical interfaces: SC, ST or FC; single mode
  • Supporting 1600 Byte packet
  • Wavelength: 1310nm/1550nm
  • Internal circuit of prevented thunder could greatly reduce damage of the converter caused by thunderbolt induction
  • Converter working mode could be chosen: Store and forward switch mode, modified cut-through switch mode, or Converter mode
  • Stand alone or card type can be chosen
  • Indicator function of link fault (LFP): When optical fiber is at fault, the converter could stop all the link
  • To provide external DC power supply and built-in power supply in two forms

Application

  • Operating standards: IEEE802. 3u, 10/100Base-TX and 100Base-FX
  • MAC address table: 1K
  • Data buffer: 128K
  • UTP Connector: RJ-45 10/100Mbps; Fiber Connector: SC 100Mbps
  • UTP Cable: Cat. 5 UTP (the max distance up to 100m)
  • Fiber (Single mode) Cable: 8. 3/125, 8. 7/125, 9/125, 10/125μm (the max distance up to 90km)
  • Full Duplex: Supporting standard IEEE802. 3x
  • Half Duplex: Back pressure
  • Working temperature: 0 ~ 50℃
  • Storage temperature: -20 ~ 70℃
  • Humidity: 5% ~ 90%(noncondensing)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: